fast print

3D printer nozzle diameter comparison: 0.4mm vs. 0.35mm vs. many others

Posted on 08/07/201306/11/2020 by XueMing

Owning 3D printers with different nozzle diameters, I am able to give some first-hand experience on their advantage and disadvantage… continue on yu.xueming.org

Update: my blog has moved! Check out yu.xueming.org

Rate this:

Posted in 3D PrintTagged 3D printer, comparison, fast print, Nozzle diameter, RepRap, smooth finish, Type A Machine, UP!3D2 Comments

Gallery

The one with yellow bulb was just reworked.

A stereo set of Point Grey Flea3 FL3-GE-50S5C connected to Banana Pi BPi M1

Rebel Z LED

Remote camera for cell phone

Disassembled Ricoh Theta Panorama Camera.

Relow Oven

Drill pilot hole before notching. Try keep the hole perpendicular to the tube.

Siding removed.

3D printer nozzle diameter

How to solder 123-pin LGA chip

Recent Comments

	Designing bootloader… on Designing bootloader for Micro…
	How to 3D print peel… on Making a heated build platform…
	XueMing on DIY, how to build your own can…
	Anonymous on DIY, how to build your own can…
	XueMing on DIY, how to build your own can…
	John on DIY, how to build your own can…
	makautomaticdoors on DIY, how to build your own can…